{"id":57208,"date":"2026-08-17T11:18:23","date_gmt":"2026-08-17T09:18:23","guid":{"rendered":"https:\/\/wodatherm.com\/?post_type=product&p=57208"},"modified":"2026-09-22T23:04:33","modified_gmt":"2026-09-22T21:04:33","slug":"seplos-mason-560l-n-32-kwh","status":"publish","type":"product","link":"https:\/\/wodatherm.com\/en\/product\/seplos-mason-560l-n-32-kwh\/","title":{"rendered":"SEPLOS MASON-560L-N 32 kWh \u2013 51.2 V LiFePO4 solar battery"},"content":{"rendered":"
\n
\n

32.1536 kWh \u00b7 51.2 V \u00b7 628 Ah \u00b7 LiFePO4<\/p>\n

A 32 kWh solar battery for larger daily energy demand<\/h2>\n

SEPLOS MASON-560L-N<\/strong> is a ready-assembled low-voltage LiFePO4 battery for photovoltaic self-consumption, compatible backup systems and selected off-grid projects. Its 2P16S cell arrangement provides 32.1536 kWh nominal energy at 51.2 V and 628 Ah in one floor-standing cabinet.<\/p>\n

The battery is supplied without an inverter. WodaTherm\u2122 checks the exact inverter model, communication profile, firmware, cable pinout, protection concept and the ordered battery revision before confirming the system. Capacity in kilowatt-hours and available power in kilowatts are separate design decisions.<\/p>\n<\/section>\n

\n

Why choose MASON-560L-N?<\/h2>\n
\n
\n

32.1536 kWh in one cabinet<\/h3>\n

The large nominal energy reserve suits homes and smaller commercial sites that need more overnight capacity than a single 14\u201316 kWh battery can provide.<\/p>\n<\/article>\n

\n

51.2 V low-voltage architecture<\/h3>\n

The battery is designed for a compatible low-voltage hybrid, off-grid or battery inverter. The selected protocol and electrical limits must match the exact inverter.<\/p>\n<\/article>\n

\n

Active cell balancing<\/h3>\n

The supplied specification describes up to six balancing channels operating simultaneously at 2.5 A per channel. This helps control cell-voltage differences in a 628 Ah pack.<\/p>\n<\/article>\n

\n

Colour display and communications<\/h3>\n

Local monitoring is available at the cabinet, while CAN and RS485 provide the interfaces used for a supported inverter profile and service diagnostics.<\/p>\n<\/article>\n

\n

Ventilated cabinet with fan<\/h3>\n

The enclosure uses forced ventilation. Correct clearances and a dry, ventilated technical room remain essential; the fan is not a substitute for suitable installation conditions.<\/p>\n<\/article>\n

\n

Controlled positioning before connection<\/h3>\n

Castors and side handles help trained personnel position the disconnected cabinet. At 245 kg, it is heavy stationary equipment, not a portable power station.<\/p>\n<\/article><\/div>\n<\/section>\n

\n

Technical data from the supplied MASON-560L-N specification<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Model<\/th>\nSEPLOS MASON-560L-N<\/td>\n<\/tr>\n
Chemistry and configuration<\/th>\nLiFePO4, 2P16S<\/td>\n<\/tr>\n
Nominal energy<\/th>\n32.1536 kWh<\/td>\n<\/tr>\n
Nominal voltage<\/th>\n51.2 V<\/td>\n<\/tr>\n
Rated capacity<\/th>\n628 Ah<\/td>\n<\/tr>\n
Working-voltage range<\/th>\n43.2\u201357.6 V in the supplied parameter table<\/td>\n<\/tr>\n
Recommended charge\/discharge current<\/th>\n157 A at 25 \u00b12 \u00b0C<\/td>\n<\/tr>\n
Maximum charge\/discharge current<\/th>\n200 A at 25 \u00b12 \u00b0C in the supplied parameter table<\/td>\n<\/tr>\n
Operating temperature<\/th>\n0 to 55 \u00b0C charge; -15 to 55 \u00b0C discharge in the supplied parameter table<\/td>\n<\/tr>\n
Communication<\/th>\nCAN and RS485<\/td>\n<\/tr>\n
Dimensions<\/th>\n416 \u00d7 560 \u00d7 910 mm in the supplied parameter table<\/td>\n<\/tr>\n
Product weight<\/th>\n245 kg \u00b13 kg<\/td>\n<\/tr>\n
Enclosure rating<\/th>\nIP10<\/td>\n<\/tr>\n
Reference cycle life<\/th>\n8,000 cycles to 70% SOH under the manufacturer\u2019s stated conditions; not a time warranty<\/td>\n<\/tr>\n
Package<\/th>\n660 \u00d7 510 \u00d7 1033 mm; stated shipping weight 275 kg<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

The supplied document and the current manufacturer page differ in several revision-dependent values, including the lower working voltage, temperature range and maximum discharge current. The appearance drawing also labels 818 mm while the parameter table states 910 mm. WodaTherm\u2122 therefore confirms the ordered revision, nameplate and applicable document before dispatch rather than combining incompatible values.<\/p>\n<\/section>\n

\n

Compatibility with a hybrid or battery inverter<\/h2>\n

CAN or RS485 identifies the communication interface, not universal compatibility. The inverter must support the battery\u2019s protocol, voltage range, current limits and number of parallel units. A cable with an 8P8C connector can still have the wrong pinout, so the communication lead is confirmed as part of the order.<\/p>\n

For a compatibility check, provide the inverter manufacturer and exact model, firmware version where available, required backup mode, intended number of batteries and the planned AC power. WodaTherm\u2122 then checks the BMS profile, DC protection, conductor sizing and commissioning limits. Photovoltaic modules do not connect directly to this battery.<\/p>\n<\/section>\n

\n

Capacity, power and expected runtime<\/h2>\n

32.1536 kWh is nominal stored energy. The energy available to loads is lower after operating reserve, conversion losses, temperature effects and BMS limits. Runtime depends on the actual load: a steady 2 kW load uses energy very differently from a heat pump, workshop machinery or several appliances starting together.<\/p>\n

The recommended 157 A battery current corresponds to roughly 8 kW on the nominal DC side before losses; this is a design reference, not a guaranteed AC output. The inverter rating, state of charge, temperature, cable design and configured current limit determine the usable system power. A consumption profile and a list of essential backup circuits are therefore more useful than annual consumption alone.<\/p>\n<\/section>\n

\n

Parallel expansion requires a complete electrical design<\/h2>\n

The supplied specification allows up to sixteen matching packs in parallel. Expansion is subject to the inverter\u2019s supported battery capacity and current, identical battery model and compatible firmware, correct state-of-charge preparation, equal cable paths, suitable busbars and protection for every branch. Different brands or models must not be mixed.<\/p>\n

Multiple 32 kWh cabinets also change room layout, floor loading, service access, ventilation and fault-current considerations. The manufacturer\u2019s installation illustration shows clearance around each cabinet; WodaTherm\u2122 sizes the complete arrangement for the actual site rather than treating parallel operation as a simple capacity multiplier.<\/p>\n<\/section>\n

\n

Indoor installation, handling and commissioning<\/h2>\n

IP10 makes MASON-560L-N an indoor product. It belongs in a dry, ventilated technical space on a stable, level and non-combustible surface, protected from water, condensation, impact, flammable materials and unauthorized access. The installation route and floor loading must be assessed before delivery.<\/p>\n

Castors are for controlled positioning of the disconnected cabinet on a suitable surface. The 245 kg unit requires appropriate handling equipment and trained personnel; it must not be moved while connected. A qualified installer provides DC isolation and overcurrent protection, protective bonding, correctly rated conductors and communication cabling, then records cell voltages, temperatures, firmware, inverter profile and serial number during commissioning.<\/p>\n<\/section>\n

\n

Documents, warranty and order route<\/h2>\n

The locally hosted MASON-560L-N specification<\/a> contains the detailed BMS, communications, balancing, installation and safety information. The SEPLOS warranty agreement<\/a> expressly names MASON-560L-N and describes five years of free warranty followed by five years of paid warranty, subject to the document\u2019s conditions and exclusions.<\/p>\n

The original European seller currently shows the exact variant as sold out. The present manufacturer route lists China origin and a 30-day lead time, so dispatch and heavy-freight timing are confirmed with the order. Visible packaging damage must be photographed with the carrier before acceptance. The inverter, site cabling, switchgear, lifting equipment, installation and commissioning are separate unless expressly included in the quotation.<\/p>\n

Compare other solar batteries and battery storage<\/a>, read about the SEPLOS range<\/a>, or send WodaTherm\u2122 your inverter and consumption data<\/a> for a compatibility and sizing check.<\/p>\n<\/section>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

Use more of your own solar energy and build a dependable reserve for evening consumption and a properly designed backup system.<\/strong><\/p>\n

Key features: 32 kWh \u00b7 LiFePO4 technology.<\/strong> SEPLOS MASON-560L-N 32 kWh \u2013 51.2 V LiFePO4 solar battery. A strong choice for new installations and carefully planned expansion. We can verify voltage, communication protocol and the exact inverter model before ordering.<\/p>\n","protected":false},"featured_media":57412,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[2757],"product_cat":[2753,2912],"product_tag":[2840,2832,2834,2819,2839],"class_list":["post-57208","product","type-product","status-publish","has-post-thumbnail","product_brand-seplos","product_cat-bateriova-uloziste","product_cat-complete-battery-systems","product_tag-32-kwh-solar-battery","product_tag-lifepo4-baterie-48-v","product_tag-aktivni-balancovani","product_tag-low-voltage-battery-storage","product_tag-mason-560l-n","first","onbackorder","purchasable","product-type-simple"],"acf":[],"_links":{"self":[{"href":"https:\/\/wodatherm.com\/en\/wp-json\/wp\/v2\/product\/57208","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wodatherm.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/wodatherm.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/wodatherm.com\/en\/wp-json\/wp\/v2\/comments?post=57208"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/wodatherm.com\/en\/wp-json\/wp\/v2\/media\/57412"}],"wp:attachment":[{"href":"https:\/\/wodatherm.com\/en\/wp-json\/wp\/v2\/media?parent=57208"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/wodatherm.com\/en\/wp-json\/wp\/v2\/product_brand?post=57208"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/wodatherm.com\/en\/wp-json\/wp\/v2\/product_cat?post=57208"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/wodatherm.com\/en\/wp-json\/wp\/v2\/product_tag?post=57208"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}